Tractors are the most versatile heavy machine that can be used in numerous different areas from agriculture, earthwork and forestry. With various pieces of attachments there is a lot you can do with a tractor. During the wintertime, they are also often used in snow clearing exercises. With the right snow clearing attachments and proper tires they are excellent snow ploughs. You do however need winter tire, so that you will have sufficient traction to perform the work.
It is not only when you perform snow clearing work that you
might need winter tires on your tractor, when you work in snowy conditions and
you have to have good traction and control, you will need to make sure that you
have winter tractor tires. You might
even need to equip them with studs for extra-improved grip. A lot of tires have
predefined positions for studs, so that you can easily add them. Working on a
farm or in the forest might require that you have excellent grip all year
round, so this is when you will start looking for a provider of excellent
winter tires for that special grip.
On the farm you probably use flotation tires, so you will need to get flotation tires that also can be used during wintertime, so that the rubber compound doesn’t get too hard and loses all the grip. Even on the farm you will most likely need to clear a lot of snow during the wintertime around the farm so that you can keep it operational. Agricultural tires nowadays tend to be both on and off road tires, so that you can easily do contract work with the equipment. This means that they will need to have low rolling resistance and wear combined with very good driving properties on roads, so that they provide good driving comfort.
For the tires, if you will need to drive on roads throughout
the years, you will need to have non-studded, as it is not convenient to change
the tires between the seasons as you do with cars. So you will need to then do
with the non-studded tires that are suitable for winter use that will still be
able to provide sufficient grip and traction on snowy and icy surfaces so that
you can effectively perform you tasks all year round.
Today’s agriculture is getting more dominated by various equipment and the loads are increasing. This puts more requirements on the tractors and the trailers and attachments that are used. It also puts a lot of pressure on the tires, which will need to be able to handle the higher loads. They also have to be able to work both on and off the fields, while when they are on the field they should have only limited impact on the soil. When heavy equipment is driven on the soil they might cause the soil to compact, making it less fertile and resulting in lower yield. So you have to take this into consideration when you are looking for tires for your equipment.
It is not only the tractor that needs tires; you will need tires for a lot of your equipment as well. You will need to have the same or at least similar requirements on those tires to ensure that you can be as productive as possible. Tire problems will slow you down regardless if it is the manure spreader tires that fail, or the slurry truck tires or the trailer tires. All the problems will slow you down and the wrong tire selection can put a lot of stress on the soil and compact it so that the yield is reduced.
When you are selecting agriculture tires, you are most likely looking at flotation tires as they have proven to be the best choice for farms, due to their low soil impaction. They have very low surface pressure and are very good at providing traction and stability on soft surfaces, which is important while maneuvering the heavy equipment and attachments across the soil. They can also handle on road transportation well on roads even at high speeds, with minimum wear and a high degree of driving comfort.
During the tire selection using the technical tire manual can be very helpful as it helps you in selecting the correct tires for the machine and for the application. You will be able to see all available dimensions and what are the load limitations and the tire pressure that you will need to have. The tires have a low rolling resistance which means that they have a low fuel consumption, which comes in handy as you drive.
When working with heavy equipment you want to be prepared for any challenges, especially those that can delay your work. If you end up with bad weather you will have to rely on the tires to provide you with good performance despite the weather conditions. What you really don’t want to do is to have to wait for bad weather to clear, as that will be a bad use of your resources. You will need to make sure that you can continue unhindered regardless of what weather conditions that you will face.
Having good equipment overall tends to increase your productivity more than the initial investment, as you tend to have less problems and fewer unscheduled maintenance occasions. These unscheduled disturbances can become very disruptive and expensive, far outweighing any additional capital investment costs made into higher quality options. Investing into high quality tires is almost always a good investment regardless if it is loader tires or excellent backhoe tires, as the additional service life, minimum downtime will outweigh the additional costs. This is why proper tire selection is so crucial when it comes to heavy equipment.
If the better tires also allow you to work in harsh weather conditions such as heavy rain, mud and even snow, you will be able to drastically improve your productivity. Grip comes from how well the tire’s tread can interact with the surface and its surroundings. The design or the tread and how well it interacts will provide you with the grip that you will need. This takes years of testing and preferably cooperation with the customers as well as the equipment manufacturers to achieve the best tread pattern so that you will have good productivity from your machines.
When you select tires for your equipment regardless if you are looking for agricultural tires or earthmoving tires, the selection will matter and it will impact the productivity. The more service life you can get out of your tires, the better and if you can combine it with trouble free service time with minimum unscheduled maintenance and ability to work through any type of weather conditions, you have a good chance of increasing your profitability, keep your timelines and avoid problems and accidents at the workplace. All these work in your favor and should be considered when making your tire selection.
Farming today is much more run by equipment than in the past, which of course has improved the productivity. This enables a smaller farm to become profitable that is if they can leverage the machine costs. Todays tractors are getting bigger, packed with more power and can handle higher speeds. With more and more people wanting locally produced food, they are willing to pay a premium for organically farmed and for products that don’t have to travel long distances as it has less of an environmental impact.
To maximize the utilization of the equipment needed,
contracting has become a big part of today’s farming. You can outsource part of
the work to contracting companies that can do the work for you, which can be
cheaper than purchasing the specific equipment needed. The contracting
companies can purchase the equipment and cater a large number of farms to keep
the utilization high. In a similar way local farms owners can also do
contracting work on a smaller scale to other farms in the area. To cater to
this type of higher equipment utilization, you will need higher quality agriculture tires. Tires that can
do the job without much maintenance or problems are of high demand. A long
service life is key to a profitable operation.
The key in farming is the flotation tires have has a low surface pressure and thus has a
lower impact on the compaction of the soil. This ensures that you have a higher
yield versus normal tractor tires. It is not only the tractor that requires
flotation tires; you need to also fit your trailers with agricultural trailer
tires that are of flotation type.
During the winter season you can also use your tractor to
take on various snow removal contract work. This tends to be quite well paid,
as people want to have full access, which require immediate snow removal. You
will need to have winter commercial tireson your tractor that will give you
enough grip on snowy and icy roads to be able to perform the snow clearing
tasks. You also need to have tires that can easily operate on normal roads and
can drive at high speeds with good driving comfort, so that you can easily take
on contracting work to improve the profitability of your farming business.
Farming is an all year round business, where the tasks vary during the different seasons. However you will need your tractor to be able to be able to work regardless of weather conditions. So if you live in an area with a lot of snow and ice, you will need to have agricultural tires for the tractor that can manage in winter conditions. The Nokian Hakkapeliitta TRI allows for excellent performance both during winter and summer conditions. These tires offer the best possible winter performance without compromising the durability during the summer. This is not easy to do, but this tire shows the difference.
These tires have actually set the word record for fastest
tractor on snow and ice and unmanned snow plowing speed record. This just
confirms how good these tires are during the winter. They are perfect if you
will need to perform cataract work during the slow winter months at the farm.
Snow removal is an excellent extra income for any farm that already have some
tractors, which have working capacity during the winter when a lot of areas
needs to be cleared from snow to be fully operational. With the right tires on
your tractor you have a good foundation for being able to easily take on some
Contract work does though require timely and precise work,
regardless of weather. Especially if it comes down to snow clearing, then the
work has to be done promptly during the worst weather conditions. Your trailers
might require the same tires to ensure that what ever you have attached to the
tractor will also have good grip. Agricultural trailer tires have to
also be of high quality, so that they don’t slow you down when you get your job
The Nokian Hakkapeliitta TRI is also great on soil with
great traction. The rubber compound is truly good for all seasons, so that you
can use the same tire all year round. They are also good for both on and off
road driving, so that if you need to drive on roads between contract jobs,
these tires will get you there comfortably even at high speeds. You can even
use studs on these tires as they have pre-marked stud locations in case you
need even better grip and traction on ice, if you have jobs that require it.
Make sure that you don’t select tires that will impact your
yield in a negative way. Flotation tires are needed to avoid
or at least reduce the negative impact of soil compaction.
Make sure that also your trailers have flotation tires so that they don’t impact your yield in a negative way. Flotation tires give you lower surface pressure. Without proper agricultural trailer tires, you can end up getting stuck or impacting the topsoil level.
Check the full range of agricultural tires to assess, which
tires are best for your equipment and for your loads. Modern tires need to
cater for heavier machines and higher equipment utilization, which means that
you will need to make sure that your tires can handle the higher workload with
minimum downtime and costly maintenance that will impact your profitability.
To make sure that you don’t impact the yield negatively through soil compaction, which has been proven to have a very significant reduction on the yield of most crops. Today’s farming has gotten much more specialized and heavier equipment is nowadays used which require tires that can cope with these heavier machines. To ensure that you keep a high productivity and yield you need to make sure that both your tractor and your trailer tires are of flotation tire type, so that their impact on the surface is less than traditional tires. Since the surface impact can cause compaction of the soil, it negatively impacts your yield. This is the reason why you will need to use flotation tires on all the heavy equipment that will be used while driving on the field.
Flotation tires are also good while driving on roads between fields or undertaking contracting work. There are a few different models to choose from depending on if you plan to spend more time on the roads than on fields or vice versa, as the roads will wear out the tires too fast if the wrong selection is done. For the optimal selection of agricultural tires, visit the technical tire manual that will show the full range of tires that can be used for the various machines and trailers. This will help you both select the correct tire based on the circumstances and make sure that tire is available in the dimensions that you need. You also need to check if the loads intended are in line with the limitations of the tire.
optimal performance you always need to balance between making sure that you
make the optimal tire selection and that you use the tire in its intended way. You
also need to make sure that you undertake proper maintenance of the tires so
that they will last as long as expected. Check for abnormal tire wear and any
cuts or cracks and change the tires when the tread depths start approaching the
lower allowed limit. It is always better to be proactive in changing than being
reactive and changing when you already end up with costly tire problems, that
can delay work and require additional help to fix the problem. Make sure that
you keep the productivity and profitability at a high level.
The challenge of getting stuck when plowing, can be a problem, as you will need another tractor to pull you out from there. Often this scenario can be avoided by using flotation tires that float on top of the surface instead of sinking into the top layer. In addition the compaction that can happen when you don’t use flotation tires can reduce your yield due to soil compaction. Selecting the right tires can have a big impact on your output and your costs, as you will need to make sure that your equipment are running with minimum downtime and problems.
The flotation tires are wider and are often used as agriculture tires. They can distribute the pressure to a larger area, so that the heavy equipment doesn’t destroy the top layer of the soil. The tread is designed to both give you traction and stability combined with a comfortable driving experience. Tractors often need to be good for driving both on and off field, where the off field includes a lot of road driving. Depending on your tractor use and how your fields are placed and if you do additional contracting you need to select tires that are optimized for your use case. If you make the wrong selection you will wear out your tires too quickly.
You also need to select the right agricultural trailer tires. You will most likely benefit of using flotation tires on your trailers as well, to ensure that you have minimum soil compaction. You will need to take any steps to ensure that you have the highest yield possible for your operation. That includes taking every step to minimize the soil compaction and other areas that might limit your yield. You can find the best tires in the technical tire manual, where you can also find the proper tire pressure for the tires.
High quality tires will have low rolling resistance,
ensuring that you minimize your fuel costs as well as lower CO2
emissions. Environmental friendly agricultural business is becoming
increasingly more important. Low tire wear is also of essence, so that you
don’t have to invest in new tires more often than necessary. Investing in tires
that have low impact on your soil and has low degree of problems so that you
can maximize the up time, will add profits to your operations.
When farming, you basically follow 7 different steps and some of these are more important than others when you consider your profitability. The main one is probably when you actually select what crops you will actually grow. This will depend on your climate and soil, but often what is easy to sell and what stat subsidies are available as government tend to promote certain types of crops. Once the crop has been selected it is time for preparing the land for the selected crop. This can involve preparing the land using tractors to level the field and fertilizers.
need to select the seeds, purchase the seeds before you finally end up sowing
the seeds using again the tractor. The tractors and its various add-ons and
trailers will be your main vehicle to be used through the actual work needed on
the field. It is important to have a high quality tractor so that you can spend
your time farming and not be held back by mechanical problems. The same goes
with the tractor
tires, where you
need proper agricultural
tires, which have
proven track record for durable service within farming.
are irrigation, where you will know when and how much water is needed. Now you
are finally into your crop growth phase, where you need to ensure that you will
maximize the yield of your growth. Proper fertilizers can be key here, where
you aim to change to physiology of the seeds to improve the yield and
resilience to abiotic stress. In addition to ensuring the growing yield is at
its highest level, you also need to use flotation tires on your trailer to reduce the impaction
of the soil, which can negatively impact the yield of your crops.
crops have grown to its full size, it is finally time for harvesting, so that
you can recuperate your investment. Here speed and low downtime of your
equipment is essential to keep everything moving properly. With a high yield of
your crops, you should also be making a good return on investment. Proper
maintenance of your equipment should be factored in for future costs, so that
the operation can continue smoothly for years to come. Most steps will repeat
each year, unless you stick with the same crops.
Regardless if you are focusing on earthmoving or forestry, adding high quality tires to your operations, will enhance your business performance. It is not only about adding value by being more productive, the overall cost needs to be factored in as well as the safety performance. Your number one aim should always be to avoid any personnel injuries, even how minor they might be. Accidents caused by negligence, equipment breakdown or tire failure, can often be limited by proper procedures in place. Aim to minimize any downtime, but being able to maintain the equipment through regular service, where the focus is on replacing any parts that is likely to fail before the next scheduled service. If you have too many breakdowns between your scheduled service times, then you need to increase the frequency.
equipment might need less frequent service, where only some regular visual
inspection of the equipment and the agriculture
needed versus mining equipment, where both the machine and the mining tires will take a harder beating. Both
will be durable, but mining tires operate in some of the harshest circumstance
and will need more frequent service, but also the regular visual inspection.
Daily cleaning and inspection of both the tires and the equipment is always
advisable to ensure that you can continue the next shift with less risk of any
problems. If there is some problems identified it can be worked on between the
shift and not disrupt the work intended to be done during the shift. Tread wear
should always be checked so that if the tires needs to be replaced, they can be
replaced before the start of the next shift.
Utilize the technical
tire manual to
ensure that you have the correct tires and dimension and you are using the correct
tire pressure. The manual covers the full range of tires and if there are
frequent tire related problems it might be that there is another model better
suited for the conditions that are present in your work situation. These tires
should be extremely durable and should have long service life even in the
toughest conditions, so if there are tire related problems it should be
something out of the ordinary or then your tire selection is not optimal and a
more thorough selection should be done.