Skidder tires that can help pull the biggest trees

Skidders are used in forestry to drag the trees that have been felled to the landing where they can be delimbed and cut to length and put on a truck for transportation to a saw or paper mill. The forest is a tricky environment where driving any type of vehicle will be very challenging. In additions a full tree is extremely heavy, so you need massive equipment to be able to withstand the loads of the trees and forestry tires that can withstand the combined load and to have the traction to be able to drag the trees to the landing.

As you can imagine there is a lot that these forest tires have to withstand. They are not only challenged by the slippery stones and steep hills, but also by sharp rocks and stubs that easily can damage the most durable tires. Then you have the heavy loads combined with having to drag a tree through this rough terrain, without loosing any grip. As you can see there are easily a lot of things that can go wrong. To improve the grip you can use over the tire tracks or chains in addition that the skidder tires are designed for ultimate grip in the forest with a tread design that has been optimized to deal with these conditions. To withstand the load and impacts, very durable rubber compound is used. They are reinforced to prevent cut and cracks.

Avoiding problems in the forest either if it is equipment failure or tire failure should be a key focus. It becomes very costly if you have unscheduled maintenance and if it happens deep in the forest it can be very costly and time consuming. The best ways to avoid problems is to invest in high quality equipment and tires and make sure that the maintenance is adequate and of high class. Identifying problems before they grow into failures can save a lot of money, so it should be done on a regular basis. Easy steps like daily cleaning of the equipment and tires can easily reveal any minor damages. If you notice some problems make sure to address them immediately.

By having the right foundation for a successful operation and the right processes in place will make the work smoother and more productive, with less downtime.

For more tips regarding skidder tires, visit: nokianheavytyres.com

New forestry equipment and new tires

When you invest in new equipment you need to also make sure that you equip it with the best possible forestry tires that will make sure that you get the most out of your new equipment. The tires will translate the best out of your equipment and make sure that it can manage through difficult terrain and have sufficient grip to get the job done. Without proper tires the new equipment might not even be able to demonstrate what it is capable of doing.

Tires are meant to wear over time and you need to make sure that you check the tread depth so you know when you change them and check the tires for any damages, like cuts or cracks. You will need to make sure that the tires will not cause any problems, as any type of failure will be very costly. Regardless if you use cut-to-length or full-tree technology, the requirements on the tires are high. Both the environment and the weather conditions can be very harsh and these are not factors that you stop or delay your work.

Skidder tires are some of the biggest tires out there for some of the biggest machines. They will need to maneuver through the forest while pulling big trees. This requires extreme grip through a rough and harsh conditions. There shouldn’t be any conditions too rough for these tires to get the job done. This is why you will need to put some time into selecting the best tires. Currently the best tires comes from the global market leader in forestry tires, Nokian Tyres, where the Nokian Logger King LS-2 is a real beast when it comes to skidder tires.

With these tires on your skidder, you will have a tire that is built to last, with steel breakers for extreme puncture resistance with ultra durable high strength multilayer carcass. These tires have excellent grip to ensure that you can speed up the work to make sure that you have a high output combined with low downtime due to tire problems. The Nokian Tyres range has tires for a wide range of forest equipment. Check the technical tire manual to see the full range of tires, to make the best selection for your machine and to suit the challenges that you have within your forest work.

For more information regarding forestry tires, visit: https://www.nokianheavytyres.com/

Forest tires that will not let you down

Forest work will always involve harsh environment and conditions. So you will need both to have state of the art equipment that will not break down in the middle of the forest and combine that with ultra durable forest tires that will ensure that you don’t get stuck or have tire problems. If you get stuck you will need another machine that is able to pull you loose, which puts even more pressure on that machine’s tires to have sufficient grip for this, this is why you need proper forest tires so that you will have sufficient trip and traction for the conditions that you will work in.

In the forest you will face slippery rocks and hills covered in moss making them very slippery, this is why you will need tires that can also use tracks or chains to increase the grip when needed. Regardless if you need skidder tires or harvester tires, you will need them to be extremely durable, so that they don’t cut or crack under the pressure of the heavy loads or the steel fortified carcass to ensure that the rocks or stubs don’t puncture the tires. The tread design is also optimized to be self-cleaning and high load bearing capacity.

You should always aim to have long trouble free service life, to both save costs and increase productivity. When you work with only a harvester and a forwarder using the cut-to-length method you will only need 2 persons working in the woods, so despite higher investment costs and higher skill level, you tend to save money due to lower labor costs, as you need less people working. The workers tend to also be safer as they are in protected cabs while working.

When it comes to harvester tires, you should consider the Nokian Forest King F, which is a perfect choice when you will need tracks, but the tire also has excellent grip without tracks. The wide area also limits the contact pressure, which makes it gentle on the environment. When you will need to attach chains or tracks they fit easily and provide extra grip to the tires, so that you can reach trees even on the steepest hills even if they are very slippery. This is a tire that focuses on stability and productivity in demanding forestry use.

For more info regarding forest tires, visit: www.nokianheavytyres.com

The Challenging Nature Of Forestry

Forestry in big scale is heavy work that requires heavy machinery. Generally you have a timber harvester, which is an all-terrain vehicle and will have a chain-saw to cut the tree at the base and it has delimbing knives that cut the branches, for the cutting process you have feed rollers that forces the log through, while the knives limb the tree.

After the threes have been cut a skidder, another heavy machinery, drags the logs to the central collection point called the landing. The skidder can have rubber tires or have tracks, usually a quarter mile distance, limited to slopes of 30° or less if they are with rubber tires and up to 50° if they are tracked.

Difference of how they pull the logs. Cable or grapple Cable uses a cable with chokers that are attached to the log and the log can then be dragged out from the area where it was cut, the skidder doesn’t have to get that close. A grapple has steel claws that can grip a number of logs and maneuver around areas.

Once all the logs are collected at the landing they can be lifted onto trucks and driven to a sawmill or paper mill. Logging trucks can be divided into ones that are used within the forest closer to where the trees are felled and need all-terrain properties and those who are more just used for highway transport. The all-terrain has high both suspension and tire requirements to be able to handle the rough terrain. To achieve good traction in addition to good tires, you can see trucks with up to 9 axles. This is both to get better traction though the number of good tires as well as low ground pressure, which reduces the footprint in the forest.

The best time to cut down the trees is late winter, early spring. This means that the weather conditions can be quite challenging for these equipment to get there. You will need very sturdy and rugged tires that can handle both mud and snow. You need excellent steering abilities as you maneuver through rough terrain and great driving stability from the tires. The tires need to be able to carry extremely high loads and need to have excellent traction to enable to drag the logs, without slipping. Special skidder tires and harvester tires that are part of the heavy tire assortment is a must to ensure low down time and good service life. For more information regarding skidder tires, check outhttps://www.nokianheavytyres.com/